Channel Professional Powered

Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers

Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers
Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers

Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers

Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer w/ Premium XDR Mic Preamplifiers. Powers up and ready to use. No matter how much you spend on a microphone, its ultimate performance depends on how it interacts with the preamp it's plugged into.

We openly admit it: Many high-end mic preamps can effortlessly amplify the slightest sonic nuance, creating an aural panorama that's breathtakingly realistic, excitingly vivid, and truly 3-dimensional in scope. For years, they've provided fidelity that just hasn't been possible with the "stock" mic preamps built into mixing consoles. They went through hundreds of iterations and revs and spent countless hours subjectively listening (and arguing).

They started all over again several times. They scoured the world for rare parts. Then they spent more time critically listening and evaluating the design with every high-end microphone you can think of. Then they brought in veteran recording and live sound engineers for more exhaustive listening tests. What they ultimately ended up with is not just an awesome sounding design. XDR is also a highly resistant to damage caused by "hot patching" (caused by routing a phantom powered mic through a patch bay); b remarkably independent of cable-induced impedance variations; and c able to reject extremely high RF levels without compromising high frequency response. Mackie assaulted RFI on 3 fronts. First, they incorporate bifilar wound DC pulse transformers with high permeability cores that reject RFI but don't attenuate the sound at 15kHz and above. Second, they use carefully matched, high-precision components for critical areas of the XDR preamplifier. Third, they direct-coupled the circuit from input to output and used pole-zero cancellation constant current biasing (which also avoids increased intermodulation distortion at high common mode signal levels). Without hearing a trace of RFI.

If a mic preamp isn't designed right, it will actually sound different depending on the impedance of the microphone and the cable load! XDR's Controlled Interface Input Impedance system accepts an enormous range of impedances without compromising frequency response.

0.0007% Total Harmonic Distortion. The lowest ever in any compact mixer. Not only are XDR mic preamps flat within a tenth of a dB across the bandwidth of any known microphone, but are also only 3dB down at an astonishing 192kHz! Super-low intermodulation distortion at very high operating levels thanks to instrumentation-style balanced differential architecture, linear biasing, and use of DC-coupled pole-zero-cancellation constant current that frees the mic preamp from power supply fluctuations. Think of the 1202 as an ultra-premium, esoteric mic preamp...

That just happen to have really excellent compact mixers attached. Ultra-low noise, highest headroom in its class. Advanced DC pulse transformer RF rejection. 12 line inputs (4 mono, 4 stereo pairs).

Separate RCA-type tape/CD inputs and tape outputs (unbalanced). 2 aux sends with 15dB of extra gain above Unity. PFL Stereo in-place Solo on each channel. Aux 1 master with Monitor/Post assign.

3-band active EQ (80Hz, 2.5kHz, 12kHz). 75Hz Lo Cut filter eliminates stage rumble, wind noise, P-pops, and low frequency recording studio room resonances. Extra ALT 3-4 stereo bus for sub-mixes, separate recording, monitor, and'mix minus' feeds. Phantom power for premium condenser mics.

Rugged steel chassis, sealed rotary controls. Built-in power supply - no wall wart! Main Mix knob fully counterclockwise, channel Gain knobs down: -100dBu. Main Mix knob unity, channel Gain knobs down: -86.5dBu.

Mic in to Main out: 0.0007%. Main Mix knob down: -85dBu.

Channel Alt/Mute switch engaged: -84dBu. Channel Gain knob down: -83dBu. Any input to any output. Mic in to Insert Send out, max gain.

150 ohm termination: -129.5dBm unweighted. Main Mix XLR out: +28dBu. Mic in: 1.3 kilohms. Channel Insert return: 2.5 kilohms. All other inputs: 10 kilohms or greater. Tape out: 1.1 kilohms.

All other outputs: 120 ohms. The item "Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers" is in sale since Wednesday, October 20, 2021.

This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Live & Studio Mixers". The seller is "bigwavies" and is located in San Francisco, California. This item can be shipped to United States.
  • Number of Mic Inputs: 4
  • Input/Output Ports: Headphone TRS 1/4" Out
  • Custom Bundle: No
  • MPN: 1202-VLZ Pro
  • Number of Line Inputs: 12
  • Item Depth: 11 inches
  • Brand: Mackie
  • Form Factor: Console/Tabletop
  • Type: Analog Mixer
  • Number of Channels: 12
  • Item Height: 1 inch at the bottom to 3 inches at the top
  • Model: 1202-VLZ Pro
  • Features: 3-Band Equalizer
  • Country/Region of Manufacture: United States
  • Item Weight: 8.5 lbs
  • Item Width: 12 inches

Mackie 1202-VLZ Pro 12 Channel Mic/Line Mixer with Premium XDR Mic Preamplifiers